Consisting of flow sensing transducer, separate electronics package, and interconnect cable
Same as Serial Number 94124-4
Flow Data：
Fluid: 98% Sulfuric Acid (See Note 1)
Customer Line Size: Same as Previous
Customer Flow Range: 0-0.36 lph
Calibrated Flow Range: 0.036-0.36 lph
Temperature-Max: 60 C
Temperature-Operating Range: 38 C
Pressure-Max: 1 mPag
Pressure-Operating range: 0.11 mPag
Viscosity: –
Specific Gravity: 1.818
Instrument Data：
Transducer Type: TU
Wetted Material: Hastelloy-C276 (See Note 2)
Shell Material: Stainless Steel
Fittings: 1/4-inch HC276 Swagelok fittings
Local Display: Flow Rate
Calibration Units: lph
Output(s): linear 4 to 20 milliamp
Input Power: 220 VAC 50 Hz
Electronics Enclosure: None – Mounting Plate Only
Cable Length: 10 ft; up to 200 ft available at ￥28.00/ft
Notes：
1. Intek may use a substitute calibration fluid while calibrating your instrument.
If this is the case, a simple field calibration adjustment will be necessary to guarantee the highest levels of accuracy.
2. The user is responsible for the selection of process-wetted materials in view of their corrosion resistance. Intek, Inc.
makes no guarantees and assumes no liability for the corrosion resistance of the materials selected here for the application described above.